How to Unlock the iPhone 3G, 3GS on iPhone OS 3.1.3 & 4.0 Using Ultrasn0w

These are instructions on how to unlock the iPhone 3G and iPhone 3GS for use with any GSM cellphone carrier using UltraSn0w. This will work with the iOS 3.1.2, 3.1.3, 4.0, 4.0.1, 4.0.2 firmware.

Before you can follow these instructions you must have a iPhone on the 04.26.08, 05.11.07, 05.12.01, or 05.13.04 baseband(modem firmware).



If you are on T-Mobile remember to turn off 3G before starting...

Watch the Video!
For your convenience this unlock tutorial is available in video format also. Click the Watch It button to view the tutorial!

Step One
Press to launch Cydia Installer from your SpringBoard.


Step Two
Press to select the Manage tab at the bottom of the screen.


Step Three
Press to select the large Sources button


Step Four
Press the Edit button at the top right of the screen.


Step Five
Press the Add button at the top left of the screen.


Step Six
Enter http://repo666.ultrasn0w.com/ as the source url and press the Add Source button.


Step Seven
Once the source has been added press the large Return to Cydia button.


Step Eight
Press the Done button at the top right of the screen.


Step Nine
Press to select repo666.ultrasn0w.com from the list of user entered sources.


Step Ten
Press to select ultrasn0w from the list of packages


Step Eleven
Press the Install button at the top right of the screen.


Step Twelve
Press the Confirm button at the top right of the screen.


Step Thirteen
After installation completes successfully press the large Return to Cydia button.


Step Fourteen
Now press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right. Press the power button again to turn on the phone.


Step Fifteen
You should now be able to insert the SIM of your choice!


***THANKS: A big thank you to all the members of the iPhone Dev-Team for all their hard work! It is much appreciated by all.